LMR240

500 foot roll of LMR-240 cable
LMR-240 coaxial cable provides excellent performance, but yet is under 0.24" in diameter. It is the same size as RG-8X but with better specifications. It is rather stiff due to the solid center conductor.

LMR400

500 foot roll of LMR-400 cable
This is the most common used coaxial calbe in the WLAN industry. It is ideal for jumper assemblies, and short antenna feeder runs! With a 1" minimum bend radius, LMR-400 cable can be easily routed into tough, tight places without kinking.

TR-LMR-3N

3 foot length of LMR-400 with N-Male Connectors.
This cable is typically used with Tranzeo's 2.4GHz and 5.8GHz N-Connector radios and the various 2.4GHz and 5.8GHz antennas as listed on this web site.

LMR-RPTNC

3 feet (91.4cm) LMR400 cable N-Female to RPTNC-Male connectors.
This cable is frequently used with Tranzeo's indoor radios such as the TR-600 and TR-500 Series.

CAT5-OD

600 foot roll of outdoor CAT-5e cable
Cable runs are limited to a maximum of 328ft(100m) in length. Connectors are RJ-45 type for typical radio, PoE and antenna configurations.

Ethernet Cable Tips:
- A straight-thru cable has identical ends.
- A crossover cable has different ends.
- A straight-thru is used as a patch cord in Ethernet connections.
- A crossover is used to connect two Ethernet devices without a hub or for connecting two hubs.
- A crossover has one end with the Orange set of wires switched with the Green set.
- Odd numbered pins are always striped, even numbered pins are always solid colored.
- Looking at the RJ-45 with the clip facing away from you, Brown is always on the right, and pin 1 is on the left.
- No more than 1/2" of the Ethernet cable should be untwisted otherwise it will be susceptible to crosstalk.
- Do not deform, do not bend, do not stretch, do not staple, do not run parallel with power cables, and do not run Ethernet cables near noise inducing components.